Thursday, 18 March 2010

More Renders




More Make Drawings







These drawings are of various different parts that I will get engineering to make for me. They are all small and complicated parts that I wouldn't of been able to do them myself. This will also save me time for making other parts of the final product.

Saturday, 13 March 2010

Make Drawings







Some of the many drawings for all the various parts of my product. Because there are so many parts to make and the milling stage of making can take a long time, I'm adapting some of the parts so that they can be made in engineering to take some of the heat off me. This will save me from rushing the make stage and not being precise because of a tight time scale.

Reel Design

This is what the final design of the detailing on the reel should look like. I laser cut it out of two pieces of cardboard so that I didn't waste time etching out all the detailing. I think the dimensions are right and will fit nicely with the rest of the part.

It has been sized based on the dimensions of a viewmaster card. This way it means there are the right number of holes on the front and people should be familiar with the design. This might even bring back memories to older users.

^^ the part where the conical feature would be situated

^^ the other part where a cover hides the bolt which keeps the part together and allows it to rotate.

^^an idea of what the part should look like. This would all be manufactured as one piece to allow a seamless transition from the feature to the reel.

PROGRESS

Finally I have started to make my final product and it's fair to say that it's going to take a while. The material that I'm using to make the camera is high density engineering foam which has roughly the same density as MDF. Due to needing to shell this material out for my components to fit inside I have to do this on the milling machine. This is a slow process because the accuracy has to be just right and precision is key.

I started off with making the general box and this was cut with a clearance of 1~2 mm. The curves were then created on the router which was done before the block was cut into two parts, allowing the curves to flow evenly and accurately.

Then I had to cut the block into 2 equal parts so that I could start shelling out the inside. This was done on the band saw but I had to take into consideration the thickness of the saw blade. I tested this out on an offcut of MDF so that I could measure where the cut should be, leaving two equal parts.The next step was to level off both the edges on the inside so that both were even and then I could start milling out the edging where the lip is situated. The lip will allow the parts to fit snuggly together rather than making a butt joint which wouldn't look as professional. The part will also be screwed together.

When this was done I marked out the detailing on the edge where the USB cable is housed and then it was back to the milling machine. This detailing needed to be extremely precise because a case has to be made to cover this and all this part is exposed which is why I want it as neat as possible.

Due to the off cuts from the part being milled, this was often in the way of what I was doing so I felt it was neccesery to do this stage in sets of 3mm. The complete depth of the hole was 18mm so this wasn't too difficult, it just took a while.

Next, the hole on the top of the camera where the conical feature is situated was drilled out. For this I had to test out the diameter and depth of the circular drill pieces that were available before attempting this on my model.

After this I marked out where the shelling would occur on the inside of this half and then got started on it. I never managed to complete this task because the workshop shut, but this is where I will start next week!!

Thursday, 11 March 2010

Reel Form: Again

This week I made more blue foam models and this time it was for the redeisgned form of the reel so that I could see what it was like to hold, the dimensions and easy it would be to use.


Here is what I had initially thought the reel would look like.

I'm trying to style it in the same way that the camera has been so I have went for the white plastic with an orange leather feature and most importantly the conical shape. The main idea behind the reel was to incorporate the feature on the camera which holds the balloon in place. This then led onto making the handle cylindrical to allow a seamless transition into this feature. On the end of this would be the reel and this where the rotation would occur.

After making the model I realised I needed to make a couple of changes. First of all the proportions weren't right which made it look wrong. Then, the curve at the end of the handle was too much so this needs to be reduced down.

To reflect the feature on the camera, the conical shape ideally needed to be built seamlessly into the reel. Therefore, I decided to cut this feature off from the main handle and where these two connect is where the rotation would occure. This made the feature look more recognisable.

The button also needs to be repositioned higher up as the current situation made this difficult to hold. (the size of this button is still be decided upon.

I also tried out what the handle would look like with the leather feature going all the way round. This didn't look good and the other way fits with the styling of the camera so this part was fine.

Just need to make a render of all these changes again and then hopefully start making this part!!

Lomo LC-A+ Gold


The new limited edition of the lomo LC-A. I'm personally not too keen on it! It doesn't look like real gold although I'm not sure if it's just the photo but I would really like to see one. I do really like the small detaining though but not a huge fan of the giant leather feature.

"The Lomo LC-A+ has always been worth its weight in gold, but now we can say that literally. This limited edition is gilded with 24 carat gold and wrapped in the finest brown leather. Only 130 pieces have been made so it’s a real exclusive! Every camera is engraved with a unique number and a certification sheet guaranteeing its authenticity. The camera comes with 2 rolls of Lomography 800 Film and the “Lomographiere" hardcover book - all presented an elegant wooden box.

As well as being an extremely rare and beautifully crafted collectors’ item, it’s the same pocket-sized, Minitar-lensed LOMO LC-A+ we love that delivers those signature jawdropping photos with the deepest saturation, punchy contrast and shadowy vignettes. The icing on the cake – an original Russian Minitar 1 lens."

Saturday, 6 March 2010

More Camera Renders





Some more solidworks renders of the revised camera form. Still need to make a final few adjustments but I think it's looking good. Also liking how it looks against the balloon.

Reel Renders






More solidwork renders of what the reel might look like, exploring colour, material and lighting.