This is another instructable, this time for dying leather. For my camera I am having a leather feature across the front and reflect this in the handle and reel by having panels of leather on both of these. The reason that I was trying to dye leather was because the leather I wish to use is a very intense orange and it was becoming apparent that it was going to be difficult and expensive and this seemed to be the easiest way to get the right intensity that I wanted.
I also took a wee trip over to textiles to get some advice on dying leather and they weren't any use. They also told me to use this dye that I is used in this tutorial saying that it's suitable for leather. After investigating this and contacting the dye company, they inform me that they no longer sell this dye and it's not suitable for leather. This means that textiles were no use. But after browsing for a long time online I finally found a seller of the dye and decided to attempt dying the leather with this method.
For this you need:
-Dylon Cold Water Dye in a colour of your choice (I used orange!!)
-A sample of leather preferably in white or shades of. (I have used a dark tanned colour leather as this was the lightest colour I had available at the time)
-A small container
-A stick to agitate the leather
-A basin
-125grams table salt
1. Take the deep basin that is big enough to fit your sample of leather in and fill it with cold water.
2. Make sure you have your leather and dye close by. I suggest that you take a piece of wet and dry sandpaper and very lightly sand the shine from the leather. According to the textiles department this helps the dye to stick better to the leather!!
3. Dampen your leather and then place this aside until needed later on.
4. Take your container and place your Dylon Cold Water Dye into it making sure that you pierce the lid of the dye first allowing it to be released.
5. Fill the container with hot water allowing the pot to release the dye.
6. Into the container of dye and hot water add your salt.
7. Agitate the mixture ensuring that the salt to dissolve in the hot water.
8. When the salt has been dissolved and the most amount of dye has been released they water is ready to be transferred.
9. Remove the leather from the basin of water wringing out as much water as possible.
10. Add the mixture of hot water, dye and salt into the basin of cold water, removing the pot of dye, or placing it to the side.
11. Place your dampened leather into the mixture in the large basin.
12. Agitate the mixture with your stick to make sure the leather is completely covered into the mixture.
13. Because I was dying a dark shade of leather and was wanting an intense colour of orange, I decided to put some of the powder dye from the pot on top of the leather in the basin to try and make it more intense. I had also hoped that the leather would pick up more colour.
14. Leave to soak for one hour.
15. Rinse the leather with cold water until it runs clear.
16. Allow the leather to dry but do not expose it to direct heat which may take up to two days depending on the thickness of the leather.
17. You now have a different colour of leather (will post up my results soon, forgot to take an image showing before and after)
^^ this is the 2 parts which had been filed to increse the fillet diameter. This is before any finishing.
^^ In the tutorial the guy recommends working through from 400 up to 2000. What I had availbe to me at the time only went up to 1200 and I had started from 240 grade wet and dry because some of the tooling marks were difficult to remove with the 400. Therefore the grades which I used were: 240, 400, 600 and 1200. The results were just as similar.
^^ some of the parts after wet and dry sanding and metal polish applied and buffed.
^^ the shutter button. It was too difficult to sand between the grooves on the front of the part do this was just polished as best as I could.
